Platipus® – Earth Percussion Anchors 

Platipus® Anchors has over 30 years experience and has proven that the combination of Percussion Driven Earth Anchors (PDEAs) and a high strength facing material to support the load generated by the PDEA will stabilize and prevent erosion in these applications. 

ABOUT

Stabilizing slopes offer significant challenges. Many times the lack of deep rooted vegetation, excess water, poor drainage, and over steepening makes them susceptible to erosion or instability. Platipus® Anchors has over 30 years experience and has proven that they combination of Percussion Driven Earth Anchors(PDEAs) and a high strength facing material to support the load generated by the PDEA will stabilize and prevent erosion in these applications. 

 

The Platipus® ARGS Range consists of 3 main anchor types

Platipus® S2 Anchor 

The Platipus® S2 ARGS Percussion Driven Earth Anchors (PDEA) assembly comes in a variety of configurations with up to 1m of 3mm stainless steel wire tendon, two sizes of HDPE load plate and either a copper ferrule or wedge grip option. The anchor system should be driven through the surface covering material to a minimum depth of 450mm to provide an ultimate holding capacity of up to 250kg. Common facings used with Platipus® S2 Anchors include: Turf Reinforcement Matting, Turf Pavers, Geotextiles, HDPE Coverings. 

Platipus® S4 & S6 Anchors

The Platipus® S4 ARGS Percussion Driven Earth Anchors (PDEA) is the perfect solution for granular / non-cohesive soil. The larger S6 ARGS should be used in cohesive conditions. Both assemblies include a length of 4mm stainless steel wire tendon, a choice of load plates and a stainless steel conical wedge grip. They should be driven to a minimum depth of 750mm beyond the failure plane and have an ultimate holding capacity of 1000kg. Anchor depth, spacing and loads should be determined by a qualified Geotechnical Engineer. Common facings used with Platipus® S4 & S6 Anchors include: High Performance Turf Reinforcement Matting (HPTRM), High Strength Geotextiles & Geogrid, Double Twist Wire Mesh

 

BENEFITS AND FEATURES

Applications include:

  • Retaining Walls
  • Slope Stabilisation
  • Bridges
  • Sheet Piling
  • Erosion Control
  • Gabion Support
  • Rock Retention
  • Buoyancy Control/ Pipelines
  • Scaffolding
  • Foundations
  • Portable Buildings/ Structures
  • Marine Applications
  • Tunnel Linings
  • Temporary Works

SPECIFICATIONS 

CODE

GRADE

76314

Platipus S2 Anchor GEO 1m Kit

76313

Platipus S2 ARGS 1m Kit

76369

Platipus S4 ARGS 1.5m Kit

76371

Platipus S6 ARGS 1.5m Kit

76372

Platipus S6 ARGS 3m Kit

Related Products

Related Case Studies

View All

M4 Widening – Platipus® Mechanical Earth Anchoring System

20 Feb 2016

The WestConnex is a world-class infrastructure project that will cut 40 minutes from a typical journey between Parramatta and Sydney Airport. Work is underway on the first 7.5km of M4 Motorway being widened to four lanes in each direction between Parramatta and Homebush. The Rizzani Leighton Joint Venture has been contracted to design and build this section of the WestConnex project.

Read more

TCDC Slip Repair Tuateawa Coast Road – Platipus® Anchored Reinforced Grid Solutions (ARGS)

11 Feb 2016

A significant landslip had occurred on the downhill side of the road from Colville to Kennedy Bay closing it to one lane. The integrity of the road was compromised, and the slope dropped steeply down to the sea. The challenge was to prevent further surface erosion, stabilise the surface, and blend in with the surrounding environment.

Read more